Ford® F-MAX Error Code DTC Cleaner / Eraser

Error Code Cleaner / Eraser for Ford® F-MAX from 2015 till now.  Pocket Size.

Offered Error Code Cleaner is standalone device. Using of it is very easy and fast, just:

1. Turn ignition ON
2. Connect Device to diagnostic connector of the vehicle.
3. Working/Done lamp starts blinking, wait until lights up permanently green.
4. Switch ignition OFF and disconnect eraser, that’s all!

All inactive errors from supported systems are cleared!

Supported systems:

• Engine ECU (with SCR / DPF )
• Brakes (EBS 5)
• FLC – Assist Camera
• Gearbox (TRAXXON)
• FLR -Radar
• EAPU – Air Supply
• PCCM – Tempomat
• SSL
• SSR
• TCU
• TACHO – Tachograph

Supported Models:

• F-MAX 2015->
• F-MAX 2019->

 This Device supports disabling Torque reduction / Speed reduction after Exhaust Aftertreatment System Failure !

The Error Code Cleaner check connection with the vehicle. If there is no connection with vehicle it inform about it with the “Error” indicator. Thanks to this you can be sure that unwanted errors have been removed!

Error Code Cleaner is equipped with tree controls:

1. Power – is always Light when Cleaner have Power supply from diagnostic connector
2. Working/Done – this LED blinks when eraser is working and is permanently on when eraser finishes work with success
3. Error – is permanently ON if there is no connection with vehicle or blinks when device is connected to unsupported vehicle

Scope of Suppy:

• Error Code Cleaner / Eraser For Ford® Pocket Size FcomER_MAX_CB – 1 pcs.

Made in EU / 24 Months Warranty